What You Get
- Detailed Instructions
- Sequential step by step process
- Illustrations of all steps
- Clients can call for help or clarification at any step
- Ramadas of the Southwest partner Alpha-Omega Framing is available for assembly of all ramada kits (Phoenix Metro area only)
- Wood – Pioneer Model
- Rough Sawn Douglas Fir (RSDF)
- 4 - Posts
- 8 - Knee Braces
- 2 - Header Beams
Dap-Cut standard - shown above
- 3 - Cross Beams
Notched 1/2" to index
Dap-Cut standard - shown above
- 4x4 Pre-Drilled Square Cut Lattice
Spaced 8" O.C.
(Quantities vary with size)
Optional chamfer cut shown above
- ALL Posts, Knee Braces, Lattice, and Beams are pre-drilled
- Hardware (all models)
- ALL Lag Bolts Included
- Composite standoff bases included for bottom of posts
- Footing Options
- 5/8" Plated Bolt for attachment to existing pad or pavestones
- Pier block for installation in dirt
|
What You Will Need
Installation available in Arizona. Contact Us today at 480.748.5917 or
- Special Tools Required
- 2 – 6' or 7' Step ladders
- 1 – Electric impact wrench available from most tool rental stores with a 9/16" and 3/4" socket.
- 1 – Socket wrench
- 1 – Framing square
- 1 – Level
- 1 – Hammer
- Additional Supplies:
- Temporary Bracing Material
- 8 – 2" x 4" x 6' for side to side bracing until the cross beams and the knee braces are installed.
- 4 – 2" x 4" x 8' for bracing and plumbing the structure.
All Sales Are Final
|
